Clip the ordinary crossbar into the butterfly holes of the upright post.
Count the hole positions carefully to ensure the installation height is consistent on both sides.
Step 2: Install the Hanger Crossbar (with a slot on one end of the hanging plate)
Clip the hanger crossbar into the butterfly holes of the upright post. The installation height can be determined according to the length of the clothes.
Step 3: Place the Cross Brace into the Slot
Put the cross brace into the slot.
Step 4: Install the Clothes Rail
Mount the clothes rail.
Step 5: Place the Laminate
Put the laminate in place.
If you have purchased multiple laminates or clothes rails, follow the same installation method as above.
Demonstration of Independent Clothes Rail Installation
Step 1: Install the Hanging Plate
Clip the hanging plate into the butterfly holes of the upright post. Note: Install the hanging plate with the slot opening facing inward. The installation height can be adjusted as needed.
Step 2: Install the Cross Brace
Place the cross brace into the slot.Repeat the same steps for the other end.
Step 3: Install the Clothes Rail
Mount the clothes rail.
Install the Pegboard Hooks
Attach the pegboard hooks.
Final Step
All components are installed. Finally, insert the safety pin into the hole.
English
